Swamp Cooler Repair Cost Calculator

Pick what the cooler is doing, what kind it is, and how hard the roof is to reach, and this gives you the range we would quote on the phone. It is built from the same prices published on the pricing page, not from a lead form, and it does not ask for an email.

Two honest notes before you use it. The service call covers the roof visit and the first hour, and most Reno repairs finish inside that hour with the part on the truck. The one thing no calculator can see is a rusted pan or a rotten pad frame on an old cooler, which turns a repair into a replacement conversation. On the 1950s Sparks ranches and the mid-century southwest, where coolers can be decades old, plan on hearing both numbers if your unit is over fifteen years.

What each answer changes

• Symptom picks the part family. Warm air is the pump, float, or pads on most calls, which is why it lands lowest. Nothing running means the motor side, which costs more. The blowing warm air page walks through the five-minute check if you want to narrow it yourself.
• Cooler type scales the part sizes. A side-draft or window unit is a ground-level job with smaller parts; a big two-speed unit takes a bigger motor and pump.
• Roof access is time. A steep Old Southwest roof or a two-story Spanish Springs house adds ladder work and a second set of hands on some jobs.
• Age is the second-part risk. Coolers past ten years often need the belt or float at the same visit as the pump, and past fifteen the pan is the question.

If the number looks fine, send it to the form with one click and the tech arrives already knowing what you saw. If it does not, the spring start-up page explains the $120 to $250 visit that catches most of these before summer.